Anritsu MS9740A - Sense:chopper; Sense:correction:level:shift

3.4 Device Message Details
3-237
3
Message Details
:SENSe:CHOPper
Function
This command sets and queries the
dynamic range
High/Normal.
Syntax
:SENSe:CHOPper 0|2|OFF|SWITch
:SENSe:CHOPper?
0|OFF: NORMAL
2|SWITch: HIGH
Response Data
0|2
Example of Use
:SENSe:CHOPper SWIT
:SENSe:CHOPper?
>2
:SENSe:CORRection:LEVel:SHIFt
Function
This command sets the level offset and moves the screen waveform by
the level offset amount.
This command queries the level offset.
Syntax
:SENSe:CORRection:LEVel:SHIFt <numeric>[DB]
:SENSe:CORRection:LEVel:SHIFt?
Range –30.00 to 30.00 dB
Resolution 0.01 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Level offset value (dB)
–3.00000000E+001 to +3.00000000E+001
Example of Use
:SENSe:CORRection:LEVel:SHIFt -0.2DB
:SENSe:CORRection:LEVel:SHIFt?
>-2.00000000E-001