Anritsu MS9740A - Display[:Window]:Trace:y1[:Scale]:Unit

3.4 Device Message Details
3-205
3
Message Details
:DISPlay[:WINDow]:TRACe:Y1[:SCALe]:UNIT
Function
This command sets the level scale to Log or Linear.
This command queries whether the level scale is set to Log or Linear.
Syntax
:DISPlay[:WINDow]:TRACe:Y1[:SCALe]:UNIT 0|1|DBM|W
:DISPlay[:WINDow]:TRACe:Y1[:SCALe]:UNIT?
0|DBM: Log scale
1|W: Linear scale
Response Data
0|1
Example of Use
:DISPlay:WINDow:TRACe:Y1:SCALe:UNIT W
:DISPlay:WINDow:TRACe:Y1:SCALe:UNIT?
>1