Anritsu MS9740A - Calculate:marker[1|2|3|4][:State]

Chapter 3 Message Details
3-86
:CALCulate:MARKer[1|2|3|4][:STATe]
Function
This command sets and queries the On/Off state of the trace marker
display.
Syntax
:CALCulate:MARKer[1|2|3|4][:STATe] 0|1|OFF|ON
:CALCulate:MARKer[1|2|3|4][:STATe]?
The process will not change regardless of whether a number [1|2|3|4] is
specified or omitted.
0|OFF: Does not display the trace marker.
1|ON: Displays the trace marker.
Response Data
0|1
Example of Use
:CALCulate:MARKer:STATe 1
:CALCulate:MARKer:STATe?
>1