Anritsu MS9740A - Calculate:marker[1|2|3|4]:Pexcursion:pit

Chapter 3 Message Details
3-84
:CALCulate:MARKer[1|2|3|4]:PEXCursion:PIT
Function
This command sets the Search Threshold for Peak/Dip Search to Manual
and sets its value.
This command queries the Search Threshold value for Peak/Dip Search.
Syntax
:CALCulate:MARKer[1|2|3|4]:PEXCursion:PIT <numeric>[DB]
:CALCulate:MARKer[1|2|3|4]:PEXCursion:PIT?
The process will not change regardless of whether a number [1|2|3|4] is
specified or omitted.
<numeric>: Search Threshold
Range 0.01 to 10.00 dB
Resolution 0.01 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Search Threshold (dB)
+1.00000000E–002 to +1.00000000E+001
Example of Use
:CALCulate:MARKer:PEXCursion:PIT 2
:CALCulate:MARKer:PEXCursion:PIT?
>+2.00000000E+000