Anritsu MS9740A - Format:delimiter

3.4 Device Message Details
3-207
3
Message Details
:FORMat:DELimiter
Function
This command sets and queries the terminator of response data in the
remote control.
This message is a system management command.
Syntax
:FORMat:DELimiter 0|1|2
:FORMat:DELimiter?
0: Sets remote control terminator to Line Feed (LF)
1: Sets remote control terminator to Carriage Return and Line Feed
(CR/LF)
2: Sets remote control terminator to None and uses only EOI only
Response Data
0|1|2