Anritsu MS9740A - Calculate:parameter[:Category]:Wdm:pdisplay

3.4 Device Message Details
3-161
3
Message Details
Range 0.1 to 1.0 nm
Resolution 0.1 nm
If a suffix is omitted, the unit will be m.
Response Data
{0|1},<numeric>
<numeric>: Noise BW setting value (m)
+1.00000000E–010 to +1.00000000E–009
Example of Use
:CALCulate:PARameter:WDM:NNORmalize ON
:CALCulate:PARameter:WDM:NNORmalize?
>1,+1.00000000E-009
:CALCulate:PARameter[:CATegory]:WDM:PDISplay
Function
This command sets and queries the On/Off state of the Fitting Curve
display of the WDM application.
Syntax
:CALCulate:PARameter[:CATegory]:WDM:PDISplay 0|1|OFF|ON
:CALCulate:PARameter[:CATegory]:WDM:PDISplay?
0|OFF: Does not display fitting curve
1|ON: Displays fitting curve
Response Data
0|1
Example of Use
:CALCulate:PARameter:CATegory:WDM:PDISplay 0
:CALCulate:PARameter:CATegory:WDM:PDISplay?
>0