Anritsu MS9740A - Calibration:zero[:Auto]

3.4 Device Message Details
3-191
3
Message Details
:CALibration:ZERO[:AUTO]
Function
This command sets and queries the On/Off state of the Auto Offset
adjustment.
Syntax
:CALibration:ZERO[:AUTO] 0|1|OFF|ON
:CALibration:ZERO[:AUTO]?
0|OFF: Disables the Auto Offset adjustment.
1|ON: Enables the Auto Offset adjustment.
Response Data
0|1
Example of Use
:CALibration:ZERO:AUTO ON
:CALibration:ZERO:AUTO?
>1