Anritsu MS9740A - Calibration:actres

3.4 Device Message Details
3-183
3
Message Details
3.4.4 CALibration Subsystem
The commands in CALibration subsystem have the following command
hierarchy.
:ACTRes
:DATA?
:ALIG[:IMMediate]
:ALIGnment
:PRESet
:AUToalign
:ENABle
:PRESet
:RESCal
:WAVelength
:EXTernal[:IMMediate]
[:EXTernal][:NORMal]
:INTernal
[:IMMediate]
[:NORMal]
:ZCAL
:ZERO[:AUTO]
:CALibration:ACTRes
Function
This command sets and queries display of the actual resolution.
Syntax
:CALibration:ACTRes 0|1|OFF|ON
:CALibration:ACTRes?
0|OFF: Does not display the actual resolution.
1|ON: Displays the actual resolution.
Response Data
0|1
Example of Use
:CALibration:ACTRes ON
:CALibration:ACTRes?
>1