Anritsu MS9740A - Display[:Window[1]]:Trace:y[1|2][:Scale]:Spacing

3.4 Device Message Details
3-203
3
Message Details
:DISPlay[:WINDow[1]]:TRACe:Y[1|2][:SCALe]:SPACing
Function
This command sets the level scale to Log or Linear.
This command queries whether the level scale is set to Log or Linear.
Syntax
:DISPlay[:WINDow[1]]:TRACe:Y[1|2][:SCALe]:SPACing
0|1|LOG|LIN
:DISPlay[:WINDow[1]]:TRACe:Y[1|2][:SCALe]:SPACing?
0|OFF: Log scale
1|ON: Linear scale
Response Data
0|1
Example of Use
:DISPlay:WINDow:TRACe:Y:SCALe:SPACing LIN
:DISPlay:WINDow:TRACe:Y:SCALe:SPACing?
>1