Anritsu MS9740A - Sense:setting:mmmode; Sense:setting:smooth

3.4 Device Message Details
3-239
3
Message Details
:SENSe:SETTing:MMMode
Function
This command sets and queries the multimode fiber mode.
Syntax
:SENSe:SETTing:MMMode 0|1|OFF|ON
:SENSe:SETTing:MMMode?
0|OFF: Releases multimode fiber mode
1|ON: Sets multimode fiber mode
Response Data
0|1
Example of Use
:SENSe:SETTing:MMMode OFF
:SENSe:SETTing:MMMode?
>0
:SENSe:SETTing:SMOoth
Function
This command sets and queries the smoothing point count.
Syntax
:SENSe:SETTing:SMOoth 3|5|7|9|11|OFF
:SENSe:SETTing:SMOoth?
3, 5, 7, 9, 11: This is the point count for smoothing.
OFF: Smoothing is not performed.
Response Data
3|5|7|9|11|OFF
Example of Use
:SENSe:SETTing:SMOoth 3
:SENSe:SETTing:SMOoth?
>3