Anritsu MS9740A - [:Sense]:Bandwidth|Bwidth[:Resolution]

3.4 Device Message Details
3-235
3
Message Details
[:SENSe]:BANDwidth|BWIDth[:RESolution]
Function
This command sets and queries the resolution.
Syntax
[:SENSe]:BANDwidth|BWIDth[:RESolution]
<numeric>[<unit_m>]
[:SENSe]:BANDwidth|BWIDth[:RESolution]?
Set any of the following values.
0.03|0.05|0.07|0.1|0.2|0.5|1.0 (nm)
If a suffix is omitted, the unit will be m.
Response Data
<numeric>
<numeric>: Resolution (m)
Example of Use
:SENSe:BANDwidth:RESolution 0.1NM
:SENSe:BWIDth:RESolution?
>+1.00000000E-010