Anritsu MS9740A - Mmemory:protect:sysinfo; Mmemory:protect:xml

Chapter 3 Message Details
3-226
:MMEMory:PROTect:SYSinfo
Function
This command prohibits deletion of system information files saved at the
specified device.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
The system information files in the following folder of the specified device
can be set to write protect.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\System Information
This message is a system management command.
Syntax
:MMEMory:PROTect:SYSinfo
<file_name>,0|1|OFF|ON,D|<user_drive>
:MMEMory:PROTect:SYSinfo? <file_name>,D|<user_drive>
It is not necessary to add the extension to file_name.
0|OFF: Permits deletion
1|ON: Prohibits deletion
Response Data
0|1
Example of Use
:MMEMory:PROTect:SYSinfo 'SystemInfo-20131205_001',ON,E
:MMEMory:PROTect:SYSinfo? 'SystemInfo-20131205_001',E
>1
:MMEMory:PROTect:XML
Function
This command prohibits deletion of XML files saved in the specified
device.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
XML files in the following folder of the specified device can be set to
"write protect".
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\All Trace Data
This message is a system management command.
Syntax
:MMEMory:PROTect:XML
<file_name>,0|1|OFF|ON,D|<user_drive>