Anritsu MS9740A - Calculate:parameter[:Category]:Ld:nafunction

3.4 Device Message Details
3-115
3
Message Details
:CALCulate:PARameter[:CATegory]:LD:NAFunction
Function
This command sets and queries the Fitting Curve in Noise Parameter for
LD Module application.
Syntax
:CALCulate:PARameter[:CATegory]:LD:NAFunction
<switch>,{0|1|OFF|ON}
:CALCulate:PARameter[:CATegory]:LD:NAFunction?
Parameter 1: Fitting Curve Type
<switch>
Fitting Curve
LINear
Linear
GAUSs
Gauss
3
RD
3rd POLY
4
TH
4th POLY
5
TH
5th POLY
Parameter 2: Fitting Curve Display
0|OFF: Does not display fitting curve
1|ON: Displays fitting curve
Response Data
<switch>,{0|1}
Example of Use
:CALCulate:PARameter:CATegory:LD:NAFunction GAUSS,ON
:CALCulate:PARameter:CATegory:LD:NAFunction?
>GAUSS,1