Anritsu MS9740A - Mmemory:store:graphics:type; Mmemory:store:setting

3.4 Device Message Details
3-231
3
Message Details
:MMEMory:STORe:GRAPhics:TYPE
Function
This command sets and queries the file extension for the graphics data
saved by
Copy
.
Syntax
:MMEMory:STORe:GRAPhics:TYPE [BMP|PNG]
:MMEMory:STORe:GRAPhics:TYPE?
BMP: bmp format
PNG: png format
When omitted: bmp format
Response Data
BMP|PNG
:MMEMory:STORe:SETTing
Function
This command saves the trace XML file in the specified device.
Files are saved to the following directory in the specified drive.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\All Trace Data
When an error is caused because a specified device is not found, 1 is
written to the execution error bit of the standard event status register.
Syntax
:MMEMory:STORe:SETTing <file_name>[,<switch>]
It is not necessary to add the extension to file_name.
<switch>: Specify a device from the following.
INTernal: Internal storage media (Drive D)
EXTernal: USB storage media
When there are two or more USB storage media, the drive
having the first drive letter (alphabetically) is specified
automatically.
If <switch> is omitted, it defaults to INTernal.
Example of Use
:MMEMory:STORe:SETTing 'LD_module_1545nm'