Anritsu MS9740A - Calculate:parameter:category:fp

Chapter 3 Message Details
3-112
:CALCulate:PARameter[:CATegory]:FP
Function
This command sets the parameter and performs FP-LD application
analysis.
This command queries the parameter.
Syntax
:CALCulate:PARameter[:CATegory]:FP <numeric>[DB]
:CALCulate:PARameter[:CATegory]:FP?
<numeric>: Cut Level
Range 0.1 to 50.0 dB
Resolution 0.1 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Cut Level (dB)
+1.00000000E–001 to +5.00000000E+001
Example of Use
:CALCulate:PARameter:CATegory:FP 30
:CALCulate:PARameter:CATegory:FP?
>+3.0000000E+001