Anritsu MS9740A - Calculate:source:function:bwidth|Bandwidth:ndb

3.4 Device Message Details
3-179
3
Message Details
:CALCulate:SOURce:FUNCtion:BWIDth|BANDwidth:NDB
Function
This command sets and queries the cut level for the DFB-LD application.
Syntax
:CALCulate:SOURce:FUNCtion:BWIDth|BANDwidth:NDB
<numeric>[DB]
:CALCulate:SOURce:FUNCtion:BWIDth|BANDwidth:NDB?
Range 0.1 to 50.0 dB
Resolution 0.1 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Cut Level (dB)
+1.00000000E–001 to +5.00000000E+001
Example of Use
:CALCulate:SOURce:FUNCtion:BWIDth:NDB 16
:CALCulate:SOURce:FUNCtion:BWIDth:NDB?
>+1.60000000E+001
:CALCulate:SOURce:FUNCtion:BANDwidth:NDB 18
:CALCulate:SOURce:FUNCtion:BANDwidth:NDB?
>+1.80000000E+001