Anritsu MS9740A - Correspondence between Panel Operation and Message

3.2 Correspondence between Panel Operation and Message
3-3
3
Message Details
3.2 Correspondence between Panel Operation and
Message
This section explains correspondence between panel operation and
message.
3.2.1 Panel key
Table 3.2.1-1 shows the corresponding keys to message.
“
—
” in the following table indicates that there is no corresponding
message.
Table 3.2.1-1 Correspondence Between Panel Operation and Message
Key name
Command
Query
Center
:CALCulate:MARKer:MAXimum:SCENter
–
Ref Lvl
:CALCulate:MARKer:MAXimum:SRLevel
–
Auto Measure
:DISPlay[:WINDow[1]]:TRACe:ALL[:SCALe][:AUTO]
:INITiate:SMODe 3|AUTO;:INITiate[:IMMediate]
:DISPlay[:WINDow[1]]:TRACe:ALL[:SCALe][:AUTO]?
Center
:DISPlay[:WINDow]:TRACe:X[:SCALe]:CENTer
[:SENSe][:WAVelength]:CENTer
:DISPlay[:WINDow]:TRACe:X[:SCALe]:CENTer?
[:SENSe][:WAVelength]:CENTer?
Copy
:MMEMory:STORe:GRAPhics
–
Local
–
–
Log (/div)
:DISPlay[:WINDow[1]]:TRACe:Y[1|2][:SCALe]:PDIVision
:DISPlay[:WINDow[1]]:TRACe:Y[1|2][:SCALe]:PDIVision?
Marker Select
:CALCulate:LMARker:X
:CALCulate:LMARker:Y
:CALCulate:MARKer:TMK:DATA
:CALCulate:MARKer:FUNCtion:DELTa:XY
:CALCulate:LMARker:X?
:CALCulate:LMARker:Y?
:CALCulate:MARKer:TMK:DATA?
:CALCulate:MARKer:FUNCtion:DELTa:XY?
Peak Search
:CALCulate:MARKer[1|2|3|4]:MAXimum
–