About This Manual
This operation manual how to perform remote control of the MS9740A
Optical Spectrum Analyzer.
This operation manual assumes that:
•
the reader has already read the
MS9740A Optical Spectrum Analyzer
Operation Manual
and the
MS9740A Optical Spectrum Analyzer
Remote Control Operation Manual
.
Refer to the
MS9740A Optical Spectrum Analyzer (M-W3328AE)
for how
to connect the power and peripheral equipment, for the panel operations,
and the maintenance procedures.
This manual consists of the following chapters and appendix:
Chapter 1 Outline
This chapter describes an overview of remote control using SCPI
commands.
Chapter 2 Before Use
This chapter contains the following information you should read before
performing remote control of MS9740A: how to perform setup of
MS9740A, how to connect cables, message format, register structure, and
synchronous control.
Chapter 3 Message Details
This chapter explains the SCPI command messages and rules.
Appendix A Message Codes
This appendix describes error codes and their meanings.
To Next Page
Loading...
