3.4 Device Message Details
3-217
3
:MMEMory:DATA
Function
This command reads the parameters and data for 10 traces from the
XML file saved in the specified device.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
Syntax
:MMEMory:DATA <file_name>[,<switch>]
It is not necessary to add the extension to file_name.
<switch>: Specify a device from the following.
INTernal: Internal storage media (DriveD)
EXTernal: USB storage media
When there are two or more USB storage media, the drive
having the first drive letter (alphabetically) is specified
automatically.
If <switch> is omitted, it defaults to INTernal.
Example of Use
:MMEMory:DATA 'file1',INT
To Next Page
Loading...
