Anritsu MS9740A - Mmemory:copy:csv; Mmemory:copy:graphics

3.4 Device Message Details
3-215
3
Message Details
:MMEMory:COPY:CSV
Function
This command copies the trace CSV file from drives E to Z to drive D.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
The copy source CSV file should be moved to the following folder of the
specified drive.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\CSV Data
This message is a system management command.
Syntax
:MMEMory:COPY:CSV <file_name>,<user_drive>
It is not necessary to add the extension to file_name.
Example of Use
:MMEMory:COPY:CSV 'file001',E
:MMEMory:COPY:GRAPhics
Function
This command copies the graphics file file from drives E to Z to drive D.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
The copy source graphics file should be moved to the following folder of
the specified drive.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\Screenshot
This message is a system management command.
Syntax
:MMEMory:COPY:GRAPhics <file_name>,<user_drive>
It is not necessary to add the extension to file_name.
Example of Use
:MMEMory:COPY:GRAPhics 'file001',E