Anritsu MS9740A - Calculate:parameter[:Category]:Ld:noise

3.4 Device Message Details
3-119
3
Message Details
:CALCulate:PARameter[:CATegory]:LD:NOISe
Function
This command sets and queries the Detection Type of Noise Parameter
for the LD Module application.
Syntax
:CALCulate:PARameter[:CATegory]:LD:NOISe AREA|POINT
:CALCulate:PARameter[:CATegory]:LD:NOISe?
AREA: Sets Detection Type to Area
POINT: Sets Detection Type to Point
Response Data
AREA|POINT
Example of Use
:CALCulate:PARameter:CATegory:LD:NOISe AREA
:CALCulate:PARameter:CATegory:LD:NOISe?
>AREA