Anritsu MS9740A - Calculate:parameter[:Category]:Wdm:nachannel

Chapter 3 Message Details
3-156
:CALCulate:PARameter[:CATegory]:WDM:NACHannel
Function
This command sets and queries the Channel Area in Noise Parameter for
the WDM application.
Syntax
:CALCulate:PARameter[:CATegory]:WDM:NACHannel
<numeric>[<unit_m>],<numeric>[<unit_m>]
:CALCulate:PARameter[:CATegory]:WDM:NACHannel?
No.
Parameter Type
Range
Description
1
<numeric>
0.01 to 20.00 nm
Fitting Span
2
<numeric>
0.01 to 20.00 nm
Masked Span
Resolution 0.01 nm
If a suffix is omitted, the unit will be m.
Response Data
<numeric>,<numeric>
<numeric>: Fitting/Masked Span (m)
+1.00000000E–011 to 2.00000000E–008
Example of Use
:CALCulate:PARameter:CATegory:WDM:NACHannel 10NM,8NM
:CALCulate:PARameter:CATegory:WDM:NACHannel?
>+1.00000000E-008,+8.00000000E-009