3.4 Device Message Details
3-263
3
3.4.15 TRIGger Subsystem
The commands in TRIGger subsystem have the following command
hierarchy.
[:SEQuence]
:DELay
:SOURce
:STATe
:TRIGger[:SEQuence]:DELay
Function
This command sets and queries the delay time when using the external
trigger.
Syntax
:TRIGger[:SEQuence]:DELay <numeric>[S|MS|US|NS]
:TRIGger[:SEQuence]:DELay?
<numeric>: Delay time
Range 0 to 5 s
Resolution 1
µ
s
If a suffix is omitted, the unit will be s.
Response Data
<numeric>
<numeric>: Delay time (s)
+0.00000000E+000 to +5.00000000E+000
Example of Use
:TRIGger:SEQuence:DELay 6.553MS
:TRIGger:SEQuence:DELay?
>+6.55300000E-003
To Next Page
Loading...
