Chapter 3 Message Details
3-232
:MMEMory:STORe:TRACe
Function
This command saves a trace as CSV, XML and graphic files to the
specified device.
Files are saved to the following directory in the specified drive.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\CSV Data
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\Screenshot
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\All Trace Data
When an error is caused because a specified device is not found, 1 is
written to the execution error bit of the standard event status register.
Syntax
:MMEMory:STORe:TRACe
<trace_name>[,CSV],<file_name>[,{INTernal|EXTernal}]
It is not necessary to add the extension to file_name.
<switch>: Specify a device from the following.
INTernal: Internal storage media (Drive D)
EXTernal: USB storage media
When there are two or more USB storage media, the drive
having the first drive letter (alphabetically) is specified
automatically.
If <switch> is omitted, it defaults to INTernal.
Example of Use
:MMEMory:STORe:TRACe TRD,'LD_module_1545nm',EXTernal
To Next Page
Loading...
