Anritsu MS9740A - Trace:attribute:ravg[:<Trace_Name>]; Trace[:Data]:Snumber

Chapter 3 Message Details
3-254
:TRACe:ATTRibute:RAVG[:<trace_name>]
Function
This command sets and queries the average processing (sweep
averaging) count.
Syntax
:TRACe:ATTRibute:RAVG[:<trace_name>] <numeric>
:TRACe:ATTRibute:RAVG[:<trace_name>]?
Even though <trace_name> is specified, this command sets or queries the
sweep average count of every trace.
<numeric>: Sweep average setting value 1 to 1000
Response Data
<numeric>
Example of Use
:TRACe:ATTRibute:RAVG:H 300
:TRACe:ATTRibute:RAVG:H?
>300
:TRACe[:DATA]:SNUMber?
Function
This command queries the number of sampling points.
Syntax
:TRACe[:DATA]:SNUMber? <trace_name>
Response Data
51|101|251|501|1001|2001|5001|10001|20001|50001
Example of Use
:TRACe:DATa:SNUMber? B
>501