Anritsu MS9740A - Mmemory:delete; Mmemory:delete:sysinfo

Chapter 3 Message Details
3-218
:MMEMory:DELete
Function
This command deletes files saved in the specified device.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
This message is a system management command.
Syntax
:MMEMory:DELete <file_name>[,{<switch>|<user_drive>}]
It is necessary to add the extension to file_name.
<switch>: Specify a device from the following.
INTernal: Internal storage media (DriveD)
EXTernal|FLOPpy:
USB storage media
When there are two or more USB storage media, the drive
having the first drive letter (alphabetically) is specified
automatically.
If <switch> is omitted, it defaults to INTernal.
Example of Use
:MMEMory:DELete 'Sample_01.csv',INTernal
:MMEMory:DELete 'Image00.png',EXTernal
:MMEMory:DELete 'LED_125M(025).xml',E
:MMEMory:DELete:SYSinfo
Function
This command deletes the system information file saved in the specified
device.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
This message is a system management command.
Syntax
:MMEMory:DELete:SYSinfo <file_name>,<user_drive>
It is not necessary to add the extension to file_name.
Example of Use
:MMEMory:DELete:SYSinfo 'SystemInfo_20140101_010203',E