Anritsu MS9740A - Calculate:parameter[:Category]:Wdm:slice

Chapter 3 Message Details
3-166
:CALCulate:PARameter[:CATegory]:WDM:SLICe
Function
This command sets and queries Slice Level in Signal Parameter at WDM
application.
Syntax
:CALCulate:PARameter[:CATegory]:WDM:SLICe <numeric>[DB]
:CALCulate:PARameter[:CATegory]:WDM:SLICe?
<numeric>: Slice Level
Range 0.1 to 50.0 dB
Resolution 0.1 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Slice Level (dB)
+1.00000000E
–
001 to +5.00000000E+001
Example of Use
:CALCulate:PARameter:CATegory:WDM:SLICe 3
:CALCulate:PARameter:CATegory:WDM:SLICe?
>+3.00000000E+000