Anritsu MS9740A - Calculate:parameter[:Category]:Ndb

3.4 Device Message Details
3-129
3
Message Details
:CALCulate:PARameter[:CATegory]:NDB
Function
This command sets the ndB-Loss method and loss and performs
spectrum analysis.
This command queries the loss.
Syntax
:CALCulate:PARameter[:CATegory]:NDB <numeric>[DB]
:CALCulate:PARameter[:CATegory]:NDB?
Range 0.1 to 50.0 dB
Resolution 0.1 dB
If a suffix is omitted, the unit will be dB.
Response Data
<numeric>
<numeric>: Loss (dB)
+1.00000000E
–
001 to +5.00000000E+001
Example of Use
:CALCulate:PARameter:CATegory:NDB 20.2
:CALCulate:PARameter:CATegory:NDB?
>+2.02000000E+001