Anritsu MS9740A - Mmemory:move:csv

3.4 Device Message Details
3-221
3
Message Details
EXTernal|FLOPpy:
USB storage media
When there are two or more USB storage media, the drive
having the first drive letter (alphabetically) is specified
automatically.
If <switch> is omitted, it defaults to INTernal.
Example of Use
:MMEMory:LOAD:TRACe a,'LED_125M(025)',EXTernal
:MMEMory:MOVE:CSV
Function
This command moves the trace CSV file from drive D to drives E to Z .
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
The copy source CSV file should be moved to the following folder of the
specified drive.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\CSV Data
This message is a system management command.
Syntax
:MMEMory:MOVE:CSV <file_name>,<user_drive>
It is not necessary to add the extension to file_name.
Example of Use
:MMEMory:MOVE:CSV 'PMD_Coupler-03',F