Anritsu MS9740A - Status:event:condition; Status:event:enable

3.4 Device Message Details
3-247
3
Message Details
3.4.12 STATus Subsystem
The commands in STATus subsystem have the following command
hierarchy.
:EVENt
:CONDition?
:ENABle
:ERRor
:CONDition?
:ENABle
:STATus:EVENt:CONDition?
Function
This command queries the end event status register value.
Syntax
:STATus:EVENt:CONDition?
Response Data
<numeric>
<numeric>: End event register value 0 to 255
:STATus:EVENt:ENABle
Function
This command sets and queries the enable register value of the end event
status register.
Syntax
:STATus:EVENt:ENABle <numeric>
:STATus:EVENt:ENABle?
<numeric>: Enable register value 0 to 255
Response Data
<numeric>