Anritsu MS9740A - Display[:Window]:Trace:X[:Scale]:Stop; Display[:Window[1]]:Trace:y:scale:linear

Chapter 3 Message Details
3-200
:DISPlay[:WINDow]:TRACe:X[:SCALe]:STOP
Function
This command sets and queries the stop wavelength.
Syntax
:DISPlay[:WINDow]:TRACe:X[:SCALe]:STOP
<numeric>[<unit_m>]
:DISPlay[:WINDow]:TRACe:X[:SCALe]:STOP?
Range 600.0 to 1800.0 nm (Stop wavelength)
Resolution 0.1 nm
If a suffix is omitted, the unit will be m.
Response Data
<numeric>
<numeric>: Stop wavelength (m)
+6.00000000E–007 to +1.80000000E–006
Specify larger value than Start wavelength.
Example of Use
:DISPlay:WINDow:TRACe:X:SCALe:STOP 1600NM
:DISPlay:WINDow:TRACe:X:SCALe:STOP?
>+1.60000000E-006
:DISPlay[:WINDow[1]]:TRACe:Y:SCALe:LINear
Function
This command sets the level scale to Log or Linear.
This command queries whether the level scale is set to Log or Linear.
Syntax
:DISPlay[:WINDow[1]]:TRACe:Y:SCALe:LINear 0|1|OFF|ON
:DISPlay[:WINDow[1]]:TRACe:Y:SCALe:LINear?
0|OFF: Log scale
1|ON: Linear scale
Response Data
0|1
Example of Use
:DISPlay:WINDow:TRACe:Y:SCALe:LINear ON
:DISPlay:WINDow:TRACe:Y:SCALe:LINear?