Anritsu MS9740A - Mmemory:move:xml

3.4 Device Message Details
3-223
3
Message Details
:MMEMory:MOVE:XML
Function
This command moves the trace XML file from drive D to drives E to Z.
If the specified device or file cannot be found and an error is generated,
the standard event status execution error bit becomes 1.
The XML file should be moved to the following folder of the specified
drive.
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\All Trace Data
This message is a system management command.
Syntax
:MMEMory:MOVE:XML <file_name>,<user_drive>
It is not necessary to add the extension to file_name.
Example of Use
:MMEMory:MOVE:XML 'Trace-OPT_AMP',F