Anritsu MS9740A - Calculate:marker:zone:wavelength

Chapter 3 Message Details
3-94
:CALCulate:MARKer:ZONE:WAVelength
Function
This command sets and queries the center wavelength of the zone
marker and wavelength width.
Syntax
:CALCulate:MARKer:ZONE:WAVelength
<numeric>[<unit_m>],<numeric>[<unit_m>]
:CALCulate:MARKer:ZONE:WAVelength?
No.
Parameter type
Range
Description
1
<numeric>
Larger than Start
wavelength and smaller
than Stop wavelength
Zone Marker center
wavelength
2
<numeric>
Larger than 0.2 nm and
smaller than wavelength
span
Zone Marker
wavelength width
Resolution 1 pm
If a suffix is omitted, the unit will be m.
Response Data
<numeric>,<numeric>
No.
Parameter type
Description
1
<numeric>
Zone Marker center wavelength (m)
2
<numeric>
Zone Marker wavelength width (m)
Example of Use
:CALCulate:MARKer:ZONE:WAVelength 1545NM,2NM
:CALCulate:MARKer:ZONE:WAVelength?
>+1.54500000E-006,+2.00000000E-009