Anritsu MS9740A - Calculate[1|2|3|4|5|6]:Math:state; Calculate:math:trc

3.4 Device Message Details
3-97
3
Message Details
:CALCulate[1|2|3|4|5|6]:MATH:STATe
Function
This command sets and queries the On/Off state of the trace type CALC.
Syntax
:CALCulate[1|2|3|4|5|6]:MATH:STATe 0|1|OFF|ON
:CALCulate[1|2|3|4|5|6]:MATH:STATe?
Specify the Active trace (A to F) by specifying a number from 1 to 6.
When omitted, the Active trace is not changed.
0|OFF: Sets Trace Type to Write
1|ON: Sets Trace Type to Calculate
Response Data
0|1
Example of Use
:CALCulate2:MATH:STATe ON
:CALCulate2:MATH:STATe?
>1
:CALCulate:MATH:TRC
Function
This command sets and queries the display method of vertical axis, and
the formula for Trace C.
Syntax
:CALCulate:MATH:TRC <switch>
:CALCulate:MATH:TRC?
<switch>
Display method
Formula
A-B(LOG)
Log scale
A–B
B-A(LOG)
Log scale
B–A
A-B(LIN)
Linear scale
A/B
B-A(LIN)
Linear scale
B/A
Response Data
A-B(LOG)|B-A(LOG)|A-B(LIN)|B-A(LIN)
Example of Use
:CALCulate:MATH:TRC A-B(LIN)
:CALCulate:MATH:TRC?
>A-B(LIN)