Anritsu MS9740A - Calculate[1|2|3|4|5|6]:Minimum[:State]

3.4 Device Message Details
3-101
3
Message Details
:CALCulate[1|2|3|4|5|6]:MINimum[:STATe]
Function
This command sets and queries the On/Off state of the Min Hold function
for Storage Mode.
Syntax
:CALCulate[1|2|3|4|5|6]:MINimum[:STATe] 0|1|OFF|ON
:CALCulate[1|2|3|4|5|6]:MINimum[:STATe]?
Specify the Active trace (A to F) by specifying a number from 1 to 6.
When omitted, the Active trace is not changed.
0|OFF: Turns off the Min Hold function for Storage Mode.
1|ON: Turns on the Min Hold function for Storage Mode.
Response Data
0|1
Example of Use
:CALCulate2:MINimum:STATe ON
:CALCulate2:MINimum:STATe?
>1