Anritsu MS9740A - Trigger[:Sequence]:Source; Trigger[:Sequence]:State

Chapter 3 Message Details
3-264
:TRIGger[:SEQuence]:SOURce
Function
This command sets and queries the trigger of the
modulation
measurement mode.
Syntax
:TRIGger[:SEQuence]:SOURce EXT|INT
:TRIGger[:SEQuence]:SOURce?
EXT: Uses external trigger.
INT: Does not use external trigger.
Response Data
EXT|INT
Example of Use
:TRIGger:SEQuence:SOURce INT
:TRIGger:SEQuence:SOURce?
>INT
:TRIGger[:SEQuence]:STATe
Function
This command sets and queries the trigger of the
modulation
measurement mode.
Syntax
:TRIGger[:SEQuence]:STATe 0|1|OFF|ON
:TRIGger[:SEQuence]:STATe?
0|OFF: Does not use external trigger.
1|ON: Uses external trigger.
Response Data
0|1
Example of Use
:TRIGger:SEQuence:STATe ON
:TRIGger:SEQuence:STATe?
>1