Anritsu MS9740A - Calculate:parameter[:Category]:Dfbld

Chapter 3 Message Details
3-110
:CALCulate:PARameter[:CATegory]:DFBLd
Function
This command sets the parameters and performs DFB-LD application
analysis.
This command queries the parameters for the DFB-LD application.
Syntax
:CALCulate:PARameter[:CATegory]:DFBLd
<switch>,<numeric>,<numeric>
:CALCulate:PARameter[:CATegory]:DFBLd?
The parameters are as follows.
No.
Parameter Type
Range
Description
1
<switch>
2NDPEAK|LEFT
|RIGHT
Detecting method of SMSR
analysis rates
2
<numeric>
0.1 to 50.0 dB
Res. 0.1 dB
Slice level
3
<numeric>
1.00 to 10.00
Res. 0.01
k:
Standard deviation factor
Response Data
<switch>,<numeric>,<numeric>
No.
Parameter Type
Description
1
<switch>
Detecting method of SMSR analysis rates
2
<numeric>
Slice level (dB)
3
<numeric>
K:
Standard deviation factor
Example of Use
:CALCulate:PARameter:CATegory:DFBLd 2ndpeak,0.1,2.00
:CALCulate:PARameter:CATegory:DFBLd?
> 2NDPEAK,+1.00000000E-001,+2.00000000E+000