Anritsu MS9740A - Calculate:parameter[:Category]:Wdm:spower

3.4 Device Message Details
3-167
3
Message Details
:CALCulate:PARameter[:CATegory]:WDM:SPOWer
Function
This command sets and queries the signal level measurement method of
the WDM application.
Syntax
:CALCulate:PARameter[:CATegory]:WDM:SPOWer
0|1|PEAK|INTegral
:CALCulate:PARameter[:CATegory]:WDM:SPOWer?
0|PEAK: Detects the peak level of the detected signal wavelength.
1|INTegral: Detects the integrated spectral power in the specified
wavelength range.
Response Data
0|1
Example of Use
:CALCulate:PARameter:CATegory:WDM:SPOWer PEAK
:CALCulate:PARameter:CATegory:WDM:SPOWer?
>0