Anritsu MS9740A - Mmemory:protect:graphics

3.4 Device Message Details
3-225
3
Message Details
:MMEMory:PROTect:GRAPhics
Function
This command prohibits deletion of screen image files saved in the
specified device.
The extension (bmp or png) of the target graphics file is the extension
specified at Copy Settings.
When an error occurs because the specified device or file is not found, the
execution error bit of the standard event status register is set to 1.
The screen image files in the following folder of the specified device can
be set to "write protect".
x:\Anritsu Corporation\Optical Spectrum Analyzer\User Data\Screenshot
This message is a system management command.
Syntax
:MMEMory:PROTect:GRAPhics
<file_name>,0|1|OFF|ON,D|<user_drive>
:MMEMory:PROTect:GRAPhics? <file_name>,D|<user_drive>
It is not necessary to add the extension to file_name.
0|OFF: Permits deletion
1|ON: Prohibits deletion
Response Data
0|1
Example of Use
:MMEMory:PROTect:GRAPhics 'LED_125M(025)',ON,E
:MMEMory:PROTect:GRAPhics? 'LED_125M(025)',E
>1