Anritsu MS9740A - Page 98

Chapter 3 Message Details
3-52
When executing the LED application
No.
Parameter type
Description
1
<numeric>
Mean Wl (FWHM): Center wavelength of
spectrum half width (m)
2
<numeric>
Mean Wl (ndB): Center wavelength using
ndB Loss method (m)
3
<numeric>
FWHM (n
σ
): Spectrum half width for
RMS (m)
4
<numeric>
n dB Width: Spectrum width using dB
Loss method (m)
5
<numeric>
Peak: Peak wavelength (m)
6
<numeric>
Peak: Peak level (dBm)
7
<numeric>
PkDens (/1nm): Spectrum density max.
value (dBm)
8
<numeric>
Total Power: Spectrum integral power
(dBm)
9
<numeric>
σ: Standard deviation differences using
RMS method (m)
When executing the PMD application
No.
Parameter type
Description
1
<numeric>
Diff Group Delay: Δt differential group
delay time (s)
2
<numeric>
1st Peak Wl: Wavelength of 1st peak (m)
3
<numeric>
Last Peak Wl: Wavelength of last peak (m)
4
<numeric>
Peak Count
When executing the WDM application (MultiPeak)
No.
Parameter type
Description
1
<numeric>
PeakCount
2
<numeric>
Wl: First peak wavelength (m)
3
<numeric>
Level: First peak level (dBm)
:
2n
<numeric>
Wl: n th peak wavelength (m)
2n+1
<numeric>
Level: n th peak level (dBm)