CAPINTEC, INC. CAPTUS
®
4000e
November 16 WIPE TESTS 8-13
Figure 8-13 Wipe Test Main Screen
4. To begin the measurements, select the Count button or press Alt+C. Figure 8-15 Wipe
Test Measurement Screen will appear.
Note: If calibration has not been performed for the current day, you will be prompted
with the message window as shown in Figure 8-14. After the calibration is
complete, the program will return to Figure 8-15 Wipe Test Measurement Screen.
Figure 8-14
To Next Page
Loading...