ENTER/EXIT PROGRAMMING MODE
178
MAGELLAN™ 900I
CODE 32 ITALIAN PHARMACODE
Code 32 Italian Pharmacode Enable
Enables/disables the ability of the scanner to decode Italian Pharmaceutical Code 39 labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar-
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
Code 32 Italian Pharmacode Enable = Disable
Code 32 Italian Pharmacode Enable = Enable
DEFAULT
00EE00(CR)
00EE01(CR)
To Next Page
Loading...
