PRODUCT REFERENCE GUIDE
249
CONFIGURATION |
2D SYMBOLOGIES/POSTAL CODES
The following pages contain configuration information concerning the various 2D and
Postal Code barcode types the scanner supports.
NOTE
If the scanner’s interface type must be changed, always be sure that interface
configuration is the FIRST item scanned during a programming session.
(Selecting an interface type resets ALL other configuration items — including
symbology programming — to the factory default for that interface type.)
SECTION CONTENTS
2D Codes
DATA MATRIX starting on page 250
PDF 417 starting on page 254
MICRO PDF 417 starting on page 258
QR CODE starting on page 262
MICRO QR CODE starting on page 267
AZTEC CODE starting on page 270
HAN XIN CODE starting on page 273
MAXICODE starting on page 276
POSTAL CODE SELECTION starting on page 280
Postal Codes
POSTNET starting on page 280
PLANET CODE starting on page 282
ROYAL MAIL starting on page 284
KIX starting on page 286
AUSTRALIA POST starting on page 287
JAPAN POST starting on page 288
IMB starting on page 289
SWEDEN POST starting on page 290
PORTUGAL POST starting on page 291
CODE39 DANISH PTT starting on page 292
CODE39 LAPOSTE starting on page 296
To Next Page
Loading...
