Dell PowerConnect 8024 - Page 117

Configuring System Information 117
Figure 6-10. SNTP Authentication
The SNTP Authentication page contains the following fields:
• SNTP Authentication — If enabled, requires authenticating an SNTP session between the device and
an SNTP server.
•
Authentication — Type of authentication. System supports MD5 only.
•
Encryption Key ID — Contains a list of user-defined key IDs used to authenticate the SNTP server
and device. Possible field values are 1–4294767295.
•
Authentication Key (1 – 8 Characters) — Displays the key used for authentication.
•
Trusted Key — Check to specify the encryption key used (Unicast) or uncheck to authenticate the
SNTP server (Broadcast).
•
Remove Encryption Key ID — Check to remove the selected authentication key.
Adding an SNTP Authentication Key
1. Open the SNTP Authentication page.
2. Click Add .
The
Add Authentication Key page displays: