Dell PowerConnect 8024 - Page 165

Configuring System Information 165
• Timeout for Reply (1 – 30) — Enter the global user configuration time that passes before the
connection between the device and the TACACS+ times out.
Defining TACACS+ Parameters
1. Open the TACACS+ Settings page.
2. Define the fields as needed.
3. Click Apply Changes .
The TACACS+ settings are updated to the device.
Adding a TACACS+ Server
1. Open the TACACS+ Settings page.
2. Click Add .
The Add TACACS+ Host page displays.
Figure 6-52. Add TACACS+ Host
3. Define the fields as needed.
4. Click Apply Changes .
The TACACS+ server is added, and the device is updated.
Displaying a TACACS+ Servers List
1. Open the TACACS+ Settings page.
2. Click Show All .
The
TACACS+ Servers Table opens .