Dell PowerConnect 8024 - Page 224

224 Configuring System Information
• NoAu NoPriv — The packet is neither authenticated nor encrypted.
•
Auth NoPriv — The packet is authenticated.
•
Auth Priv — The packet is both authenticated and encrypted.
•
UDP Port (1 – 65535) — UDP port used to send notifications. The default is 162.
•
Filter Name — Check this check box to apply a user-defined SNMP filter (selected from the drop-
down menu) to notifications.
•
Timeout (1 – 300) — Amount of time (seconds) the device waits before resending informs. The default
is 15 seconds.
•
Retries (1 – 255) — Maximum number of times the device resends an inform request. The default is 3.
Adding a New Notification Recipient
1. Open the Notification Recipients page.
2. Click Add.
The Notification Recipients page displays :
Figure 6-104. Add Notification Recipient
3. Define the relevant fields.
4. Click Apply Changes .