Dell PowerConnect 8024 - Page 225

Configuring System Information 225
The notification recipient is added, and the device is updated.
Displaying the Notification Recipients Tables
1.
Open Notification Recipients page.
2. Click Show All .
The
Notification Recipient Tables page opens:
Figure 6-105. Notification Recipient Tables
Removing Notification Recipients
1. Open the Notification Recipients page.
2. Click Show All .
The
Notification Recipient Tables page open.
3. Select the Remove check box for one or more notification recipients in the SNMPV1,2 Notification
Recipient
and/or SNMPv3 Notification Recipient Tables .
4. Click Apply Changes .
The recipients are removed, and the device is updated.
Defining SNMP Notification Recipients Using CLI Commands
For information about the CLI commands that perform this function, see the SNMP Commands c hapter
in the
CLI Reference Guide . The following table summarizes the equivalent CLI commands you use to
define SNMP notification recipients.