Dell PowerConnect 8024 - Page 401

Configuring Switching Information 401
• Included TLVs — Selects TLV information to transmit. Choices include System Name, System
Capabilities, System Description, and Port Description.
Modifying the LLDP Configuration
1. Open the LLDP Configuration page.
2. Define the fields as needed.
3. Click Apply Changes .
LLDP parameters are saved to the switch.
Displaying the LLDP Interface Settings Table
1. Open the LLDP Configuration page.
2. Click Show All .
The
LLDP Interface Settings Table displays.
Figure 7-95. LLDP Interface Settings Table
3. Use the Unit drop-down menu to view the LLDP Interface Settings Table for other units in the stack,
if they exist.
Copying LLDP Interface Settings
1. Open the LLDP Configuration page.
2. Click Show All .
The
LLDP Interface Settings Table displays.
3. Specify the Unit and Port you are copying from in Copy Parameters From .
4. Click Copy To for each Unit/Port to receive these parameters.
5. Click Apply Changes .
The LLDP Interface settings are copied, and the device is updated.