Dell PowerConnect 8024 - Page 577

Configuring Routing 577
Figure 9-48. Add VRRP Route Tracking
4. Complete the fields as necessary.
The
Add VRRP Route Trackin g page contains the following fields.
•
Interface — The interface associated with the Virtual Router ID.
•
Virtual Router ID — The Virtual Router ID.
•
Track Route pfx — Enter the destination prefix for the route to be tracked. Specify the prefix in
dotted decimal format, for example 192.168.10.0
•
Track Route pfxlen — Enter the prefix length for the route to track.
•
Priority Decrement — When a tracked route becomes unreachable, the priority decrement
specifies the amount that the router priority will be decreased. The valid range is 1 to 254. The
default value is 10.
5. Click Apply Changes to update the switch.
Configuring a Virtual Router Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• Virtual Router Redundancy Protocol Commands
The following table summarizes the equivalent CLI commands for this feature.