Configuring IPv6 619
Configuring a DHCPv6 Interface for Relay Interface Mode
1.
Open the
DHCPv6 Interface Configuration
page.
2.
Specify the desired Interface, and select
Relay
from the
Interface Mode
drop down menu.
The following screen appears:
Figure 10-11. DHCPv6 Interface Configuration - Relay
3.
Modify the fields as needed.
4.
Click
Apply Changes
.
The DHCPv6 interface configuration is saved, and the device is updated.
Configuring a DHCPv6 Interface for Server Interface Mode
1.
Open the
DHCPv6 Interface Configuration
page.
2.
Specify the desired Interface, and select
Server
from the
Interface Mode
drop down menu.
The following screen appears:
To Next Page
Loading...
